Al contenuto della pagina

Set di meccaniche per chitarra elettrica e acustica

  • Configurazione: 3 + 3 (destra e sinistra)
  • Senza usura
  • Velvet Tex e LX6-Lube per una precisione elevata e un maggiore comfort durante l'accordatura
  • Finitura della superficie di alta qualità grazie a processi di produzione migliorati
  • Per palette con uno spessore massimo di 15,4 mm
  • Design: meccaniche chiuse
  • Chiave: M6 grande in metallo
  • Rapporto di trasmissione: 1:18
  • Lunghezza dell'albero: 19,5 mm
  • Foro: 9,8 mm
  • Montaggio: vite e controdado
  • Angolazione del foro per la vite: 135°
  • Numero del produttore: 10020223.02.52
  • Superficie: cromo
  • Include viti di fissaggio, bulloni banjo e rondelle
  • Made in Germany
  • In catalogo dal Gennaio 2017
  • Numero di articolo 405883
  • Unità incluse 1 Pezzo
  • colore Cromato
  • Locking
  • Design Modern
€ 129
Tutti i prezzi incl. IVA
Disponibile
Disponibile

Questo prodotto è disponibile e può essere spedito immediatamente.

Informazioni sulla spedizione
1

73 Valutazioni dei clienti

4.8 / 5

Devi effettuare il login per poter lasciare una recensione.

IMPORTANTE: Per evitare di inserire informazioni per sentito dire, non complete o sbagliate, permettiamo di dare un giudizio delle attrezzature solo ai nostri clienti che hanno comprato la merce direttamente da noi.

Dopo il Login trovi nella tua area cliente troverete sotto la sezione "Giudica i prodotti" tutti gli articoli ai quali potrete dare un giudizio

Qualità

58 Recensioni

E
PERFETTI IN TUTTI I SENSI
EugenioMariaFalcone 16.04.2021
OTTIMO PRODOTTO, FATTURA DOC, MONTATI IN 10 MINUTI, NESSUN PROBLEMA CON I FORI SU HB-35 VB Vintage Series. CORDE BLOCCATE E SICUREZZA NELL'ACCORDATURA IN OGNI CASO. ARRICCHISCONO QUALSIASI CHITARRA ANCHE DI FASCA MEDIA BASSA. OVVIAMENTE IL TOP NELLE CHITARRE BLASONATE. AZIENDA TEDESCA... E HO DETTO TUTTO... CAPISCIAMMè
Qualità
0
0
Segnala un abuso

Segnala un abuso

D
Bellissime
Dario72 21.09.2023
Meccaniche fantastiche, prese per la mia prs e consegnate nei tempi indicati, consigliatissime
Qualità
0
0
Segnala un abuso

Segnala un abuso

G
Meccaniche top
Gennaio75 24.11.2024
La qualità, sono meccaniche molto precise e solide. Montate su una prs fanno la differenza,
Qualità
0
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
r
I didn't enjoy fitting them, but the results made it worthwhile
røde2nowhere 16.07.2020
First, I bought these to fit on a PRS SE Tremonti Custom (2017). After reading many reports of people successfully fitting them, without issues. However, in my experience, it wasn't so straightforward. First, it required a lot of force to get the washer rings into place. And it took a lot of force to press the tuning machines in flush with the back of the headstock. In fact, I damaged the locking mechanism on one of the tuners from pushing too hard against it. Perhaps I should have removed the locking screws first. That one locking mechanism is a bit difficult to turn now, but it does work.

The new tuners weigh in at 42g heavier than the PRS SE stock tuners they replaced. And I don't notice any neck dive or any other issues.

What I do notice is that it is very easy to restring the guitar. And once the strings were stretched and tuned, the tuning is now very stable. I think the guitar was good before, but this is a nice upgrade. I don't regret getting them for this guitar, even though it was a harder job than expected.
Qualità
1
0
Segnala un abuso

Segnala un abuso