Al contenuto della pagina

Condizionatore e filtro di rete professionale

  • Carico totale: 10 A
  • 10 prese VDE (IEC) sul pannello posteriore e una presa di corrente sul pannello anteriore
  • Illuminazione a LED doppia per rack, dimmerabile ed estraibile
  • Con 20 LED, il voltmetro monitora e visualizza la tensione di linea in ingresso
  • Protezione contro le sovratensioni senza manutenzione SMP (Series Mode Protection)
  • Attenuazione del rumore LIFT (Linear Filtering Technology)
  • EVS (Automatic Extreme Voltage Shutdown) per spegnimento/separazione con sovratensione permanente/estrema
  • Interruttore di protezione resettabile
  • Attacco BNC posteriore con interruttore per lampada a collo di cigno opzionale (12 V/0,5 A)
  • Formato: 19"/1U
  • In catalogo dal Febbraio 2009
  • Numero di articolo 224469
  • Unità incluse 1 Pezzo
  • Quantità di uscite 11
  • Connettore per lampade Si
  • Tensione del display LED
  • Tipo 19", 1 HE
  • Carico totale 10 A
€ 525
Tutti i prezzi incl. IVA
Disponibile
Disponibile

Questo prodotto è disponibile e può essere spedito immediatamente.

Informazioni sulla spedizione
1

138 Valutazioni dei clienti

4.8 / 5

Devi effettuare il login per poter lasciare una recensione.

IMPORTANTE: Per evitare di inserire informazioni per sentito dire, non complete o sbagliate, permettiamo di dare un giudizio delle attrezzature solo ai nostri clienti che hanno comprato la merce direttamente da noi.

Dopo il Login trovi nella tua area cliente troverete sotto la sezione "Giudica i prodotti" tutti gli articoli ai quali potrete dare un giudizio

Caratteristiche

Qualità

72 Recensioni

M
Un Must da avere in studio
MauriM 13.02.2021
Utilizzo il Furman in studio da anni ormai.

La costruzione è super solida, il look è fantastico.

Ho notato che il filtro pulisce molto il segnale e lo libera da fruscii fastidiosi tipici di impianti elettrici non proprio recenti.

Al furman ho collegato tutta la mia strumentazione da anni ormai e ne ricomprerei 10 ad occhi chiusi.

L'ho acquistato anche per la sua caratteristica che toglie immediatamente corrente nel caso di sovraccarico continuo, impedendo alla strumentazione di prendere fuoco.

Questo mi fa stare tranquillo quando magari sono momentaneamente fuori dallo studio e fuori c'è un forte temporale.

I led sono molto comodi per avere un'idea chiara si quello che sta sucedendo.

Acquisto super consigliato.
Caratteristiche
Qualità
1
1
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
m
Power Conditioner That won't let you down
matt-h 02.02.2018
I'm using this for powering my complete guitar rig no mater where. I'm using it even when I'm playing at home and it never let me down. The electricity was always consistent and I never had to worry about damaging my gear.

Before digging into it in more depth here is a quick pros & cons list:

Pros:
- Easy to use
- Rack mountable
- Get's the job done
- Integrated lights are powerful enough to light up your rack
- Enough power outputs to power big rigs

Cons:
- Comes without any additional cables

I would be really nice if there would be at least few basic power cables included. You have to get a little bit creative if you want to connect a normal power cable based device to the Furman. Other than that I can't find anything bad about it. It's a power conditioner and it works flawlessly.
Caratteristiche
Qualità
3
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
N
Amazing unity
Niozik 29.02.2020
For the first time I get to see how my electricity behaves. One of my speaker got burnt before. So I could not risk any further. Highly recomend to use this along with balanced cables (TRS/XLR) in order to avoid interference. When I first connected I was going crazy about the high pitch noise coming from speakers. Turned out I had TS cables from out of my sound card into my headphone amplifier then out of the headphone amp into the speakers. I just used a TRS connector from the output of the sound cardo into the heaphone amp and my problem was fixed. Now I have everything on my studio connected to this unity. Including hard driver . . . Best things I could ever buy . . . do not regret any cent spent on this
Caratteristiche
Qualità
1
1
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
A
Furman PL-Plus C E
Anonimo 18.02.2016
Before I've ordered the Power conditioner Furman PL-Plus CE, I've sent an e-mail withsome questions about the item after trying to get them from the web, but with no success.
From the first replay from Thomann team I've got very kind and professional reply which gave me the answers to my questions and even some information beyond.
I've ordered the Furman PL-Plus CE from Thomann and got it after 3 and a half weeks, in Israel.
The package was packed well and protected the item's box from inside.
The item is exact like I expected, looks professional and impressive, and now it looks cool in my guitar rack! ;) Now, I know that all my gear is protected, so I feel that from now on I can play more calm and not to worry for electricity shocks, even when it's raining outside! :)
Caratteristiche
Qualità
3
2
Segnala un abuso

Segnala un abuso